I-CORE · sensor signal-processing ICs
BISS0001
PIR motion-sensor signal processor in SOP-16 — factory-original I-CORE, a functional equivalent of BISS0001.
In stock · ShenzhenChinese datasheetREACHRoHS
You useBISS0001
I-CORE equivalentBISS0001
SOP-16 · 3–5 V
Key specifications
| Manufacturer | I-CORE (Wuxi I-CORE Electronics Co., Ltd.) |
|---|---|
| Part number | BISS0001 |
| Function | PIR motion-sensor signal processor |
| Package | SOP-16 |
| Supply voltage | 3–5 V |
| Operating temperature | −10 to 70 °C |
| Replaces | BISS0001 |
| Compliance | RoHS (EU 2011/65/EU + 2015/863) and REACH SVHC — third-party lab tested; reports on request |
| Datasheet | PDF, Chinese |
Questions buyers ask
- Can BISS0001 replace BISS0001?
- BISS0001 is I-CORE's functional equivalent of BISS0001 in the same SOP-16 package. Standard parts in this family share the industry pinout, but please compare both datasheets — supply range, timing and absolute maximum ratings — before design-in.
- What is the supply voltage and temperature range of BISS0001?
- Supply: 3–5 V. Operating temperature: −10 to 70 °C. See the datasheet for full electrical characteristics.
- Is BISS0001 in stock and what is the minimum order?
- Yes, it is held in stock in Shenzhen. SMD parts can be ordered from 1 pc; DIP parts ship in full tubes. Minimum order value is US$50 and shipping is charged at cost. Orders ship within 2–3 business days after payment.
- Is it original I-CORE product?
- Yes. We supply factory-original I-CORE (Wuxi I-CORE Electronics) parts in sealed reels and tubes. Our ISO 9001, ISO 14001 and ISO 45001 certificates are shown on the home page; RoHS and REACH test reports are available on request.
English datasheet summary
Translated summary of the I-CORE BISS0001 datasheet, which is published in Chinese. Prepared by Lingxing ChipMicro for quick evaluation; if anything differs, the original datasheet prevails. Need the full English datasheet? Request it.
Key features
- PIR (pyroelectric infrared) motion-sensor signal processor
- Two independent high-impedance op-amps for sensor pre-amplification
- Bidirectional amplitude discriminator for interference rejection
- Built-in output-delay and inhibit timers; internal reference
- Supply 3–5 V
Pin functions
| Pin | Name | Function |
|---|---|---|
| 1 | A | Retrigger select (1 = retriggerable, 0 = non-retriggerable) |
| 2 | VO | Control output |
| 3, 4 | RR1, RC1 | Output delay time Tx adjust |
| 5, 6 | RC2, RR2 | Inhibit time Ti adjust |
| 7 | VSS | Supply − |
| 8 | VRF/RESET | Reference / reset input (normally to VDD) |
| 9 | VC | Trigger enable (VC > ≈0.2 VDD enables) |
| 10 | IB | Op-amp bias set (≈1 MΩ to VSS) |
| 11 | VDD | Supply + (3–5 V) |
| 12 | 2OUT | Op-amp 2 output |
| 13 | 2IN− | Op-amp 2 inverting input |
| 14 | 1IN+ | Op-amp 1 non-inverting input |
| 15 | 1IN− | Op-amp 1 inverting input |
| 16 | 1OUT | Op-amp 1 output |
Absolute maximum ratings
| Parameter | Rating |
|---|---|
| Supply voltage VDD | −0.5 to +6 V |
| Current per pin | ±10 mA |
| Operating temperature | −10 to +70 °C |
Recommended operating conditions
| Parameter | Value |
|---|---|
| Supply voltage VDD | 3–5 V |
| Supply current (no load) | ≤ 50 µA at 3 V, ≤ 100 µA at 5 V |
Request a quote
USD price, stock and lead time within 1 business day. SMD parts from 1 pc, DIP in full tubes; minimum order US$50, shipping at cost.